Correct operation of fireplace fuel

Cautions in ignition

Check that the wood-burning fireplace damper is open. Make sure that the chimney is out of the air rather than drawing air into the room. Never put painted wood in the furnace. Plastic products containing chlorine, such as PVC, cannot be used as fuel. These substances will release highly toxic gases during the burning process. Do not use driftwood from the sea, the salt contained in it will be converted into toxic chlorine gas when burning.

When igniting, place two thick logs on both sides. Then you can put some wrinkled paper between the two pieces of wood to ignite, and then you can pile up a pile of dry and flammable thin wood on top of it. If necessary, more materials can be added for ignition.

If the fire burns too much, the chimney generates huge pressure from the heat. Ensure that the flame in the furnace is at a moderate level. Make sure that the flame is not smoldering, as this will produce the most serious pollution. The best state is that when the flame in the furnace is burning normally, the smoke from the chimney should be almost invisible and not much color.

This is the precautions for wood-burning fireplaces when firing, and keeping the fire is a fairly simple process. The real difficulty is the "homework" in advance, so that we can get warm in winter and be safe while preparing for work It is very important not to be too troublesome. This is how we think about ourselves and how much preparation we are doing.

https://www.wickchafingfuel.com