Operating requirements and normal combustion of fireplace fuel
May 10, 2019
When using the filling port, the fireplace fuel needs to ensure that the fireplace is turned off. There is no open flame. When the temperature of the panel is not higher than the room temperature, the alcohol can be added. After the filling is completed, the hand needs to be pinched. The connection between the hose and the plastic tube is quickly removed, and the dripping alcohol on the panel needs to be wiped clean with a rag. If you do not follow this requirement, the user will be responsible for all the consequences, and the product damage will not be guaranteed. If the internal overflowing alcohol or the surface dripping alcohol is not evaporated or wiped clean, the alcohol in the combustion chamber of the fireplace will be ignited. After that, the ambient temperature will rise, and the alcohol vapor will spontaneously ignite when it reaches a certain ignition temperature, which will ignite the dangerous internal accident of the overflowing alcohol! Please be careful not to spill alcohol into the panel and inside!
The fireplace fuel needs to be inspected before each use. There is no artificial destruction of the internal components of the combustion chamber. In use, the water level detection probe in the combustion chamber is fixed firmly, there is no dust and impurities in the combustion chamber, and there is no carbon deposit on the surface of the metal rod, dust, black. Ash, white powder, etc. If any of the above conditions are found during use, please remove the carbon deposits and dust on the surface of the metal water level needle and the dust in the combustion tank, otherwise it cannot be used!
It is necessary to check the surface condition of the water level needle every time the machine is turned on. The fuel outlet pipe has the correct water discharge direction and no looseness. The heights of the fuel liquid positions in the combustion tank are consistent. If there is one end high or low (please turn off the machine first, After the machine is cooled, please place a thin piece of iron under the low-end panel of the fireplace, non-flammable, high-temperature sheets and other items. Alcohol is always kept at the proper water level and can automatically flow to both ends of the combustion tank. There will be no overflow during normal combustion, and the fuel pump will supply fuel to the combustion chamber, and the working condition is normal.
www.wickchafingfuel.com
