Panel temperature and inspection requirements for fireplace fuel
Mar 18, 2019
Panel temperature and inspection requirements for fireplace fuel
When using the filling port, the fireplace fuel needs to ensure that the fir
place is turned off, there is no open flame, and the temperature of the panel can not be higher than the room temperature, so that the alcohol fuel can be added. After the filling is completed, the hand needs to be pinched. The connection between the hose and the plastic tube is quickly removed, and the dripping alcohol on the panel needs to be wiped clean with a rag. After the alcohol in the combustion chamber of the fireplace is ignited, the ambient temperature rises. When the alcohol vapor reaches a certain ignition temperature, it will spontaneously ignite, which will ignite the dangerous internal accident of the overflowing alcohol! Please be careful not to spill alcohol into the panel and insid
e!
The fireplace fuel needs to be inspected before use. The internal components of the combustion chamber must be destroyed unmanned. The water level detection probe in the combustion chamber is fixed firmly. There is no dust and impurities in the combustion chamber. There is no carbon deposit on the surface of the metal rod, dust, black ash, white. Powder, etc. If any of the above conditions are found during use, please remove the carbon deposits and dust on the surface of the metal water level needle and the dust in the combustion tank, otherwise it cannot be used!
It is necessary to check the surface condition of the water level needle every time the machine is turned on. The fuel outlet pipe has the correct water discharge direction and no looseness. The heights of the fuel liquid positions in the combustion tank are consistent. If there is one end high or low (please turn off the machine first, After the machine is cooled, please place a thin piece of iron under the low-end panel of the fireplace, non-flammable, high-temperature sheets and other items. Alcohol is always kept at the proper water level and can automatically flow to both ends of the combustion tank. There will be no overflow during normal combustion, and the fuel pump will supply fuel to the combustion chamber, and the working condition is normal.www.wickchafingfuel.com
