Panel temperature of fireplace fuel and inspection requirements
Nov 19, 2020
When using the fuel filler port for the fireplace, it is necessary to ensure that the fireplace is turned off and there is no open flame, and the temperature of the panel cannot be higher than room temperature, so that alcohol fuel can be added.
Pinch the connection between the hose and the plastic hard tube and pull it out quickly. The alcohol dripping on the panel needs to be wiped clean with a rag. After the alcohol in the fireplace combustion tank is ignited, the ambient temperature will rise, and the alcohol vapor will ignite spontaneously when it reaches a certain ignition temperature, which will ignite the overflowing alcohol inside and cause a dangerous accident! Please be careful not to spill alcohol on the panel and inside!
Fireplace fuel needs to be inspected before use. The internal parts of the combustion tank must be destroyed unmannedly. The water level detection probe in the combustion tank is firmly fixed, there is no dust or impurities in the combustion tank, and there is no carbon deposits, dust, black ash, white on the surface of the metal rod. Powder, etc., if you find the above situation when using it, please remove the carbon and dust on the surface of the metal water level needle and the dust in the combustion tank in time, otherwise it cannot be used!
Pay attention to check the surface condition of the water level needle every time you turn on the machine. The direction of the fuel outlet pipe is correct without looseness. The height of the fuel liquid in the combustion tank is the same at both ends. If there is a situation where one end is high (please turn off the machine first, After the machine has cooled), please properly add thin iron sheets, non-flammable, high-temperature-resistant sheets and other items under the low-end panel of the fireplace. Alcohol is always kept on a suitable water surface and can automatically flow to both ends of the combustion tank. There will be no overflow during normal combustion. The fuel supply pump will supply fuel to the combustion tank in a gap, and the working condition is normal.
www.wickchafingfuel.com
