The choice of fireplace fuel
Aug 25, 2020
When using a real wood burning fireplace, there are several types of firewood to choose from. Each wood has its own burning characteristics. The following are some of the most popular and available types of firewood.
1. Oak
Oak trees are very common and are considered to be one of the best wood supply species for real fire wood fireplaces. Proper drying will produce very slow burning and hot flames. But it does need to be treated in a dry place for at least one year, preferably two years. Like other hardwoods, oak is difficult to ignite, but once it burns it will continue violently.
2.Hard maple
This wood is very dense and heavy, and burns very slowly even when compared to other hardwoods such as oak and hickory.
3.Birch
Birch is very attractive. They can emit a lot of heat, but they burn very fast. Although birch is easier to find and cheaper than many other species, because it burns too fast, it is purchased more frequently. It is best to mix it into your fireplace firewood and combine it with other types of wood.
4. Pine
Common green plants that are widespread and highly sustainable in the northern climate. Pine trees burn faster than hardwood species and are easier to use as the "starting device" for the fire to start the first fire. The disadvantage is that it burns very quickly and does not produce the heat of hardwood. In addition, burning pine trees are usually characterized by sparks caused by liquid bubble explosions, which in turn cause creosote to accumulate in the chimney. Many people like to use softwood such as pine to make a fire, and then switch to hardwood after the flame stabilizes.
5. Chinese fir
Douglas fir may be the best coniferous planting choice for firewood. It generates moderate heat and does not produce too much ash. Older cedar trees can be burned easily and easily, but they will not produce too many bursts, smoke and ash in the furnace. If you ask whether the wood-burning real fire fireplaces popular this year are safe, choosing fir as fuel will undoubtedly be a double insurance on the issue of safety.
Most woods that have been properly treated will have good burning conditions. If it is not dried to remove the excess water, even the high-quality wood will not burn well. If the moisture content in the wood is too high, it will consume the heat in the hearth of the fireplace to evaporate the water, instead of radiant heating the area through the heat generated by the combustion of biomass.
www.wickchafingfuel.com
